Download Print this page

Honda 08B26-S2A-100B Installation Instructions Manual page 3

Cd changer attachment kit (console)

Advertisement

7.
Using a utility knife, cut out the area on the left of
the console box as indicated by the scribed lines.
CONSOLE BOX
CONSOLE
BOX
BUS CABLE
LONG
PORTION
BUS CABLE
SHORT PORTION
8.
Route the short portion of the BUS cable down
through the square hole you just made.
© 2004 American Honda Motor Co., Inc. - All Rights Reserved.
Top view
Cut out.
MARK
OPENING
BUS CABLE
AII 26316-26479 (0402)
Installing the CD changer
9.
Remove the three tapes from the CD changer and
remove and save the protective wrap.
CD
CHANGER
TAPE
10. Check that the adjusting knobs on the sides of the
CD changer are in the VERTICAL (V) position. If
the knobs are in the HORIZONTAL (H) position,
move them to the VERTICAL (V) position.
ADJUSTING
HORIZONTAL
KNOB
POSITION (H)
ADJUSTING
KNOB
TAPE
TAPE
3708040M
PROTECTIVE
WRAP
(Remove.)
VERTICAL
POSITION (V)
ADJUSTING
KNOB
2301071K
CD CHANGER
3 of 8

Advertisement

loading