About The Control Manager; Control Manager Start Page - Barco BarcoSLM G8 Owner's Manual

B. Barco Control Manager
B.2 About the control manager
Start up
To start up the Control Manager, follow the procedure as described below :
1. Start up your web browser.
2. In the Address bar of your web brower, start typing the IP address (or nick name) of the network projector. If you've typed a
similar entry before, AutoComplete lists possible matches as you type. If a suggestion in the list matches what you want to enter
in that field, click the suggestion. If not, continue typing.
3. Press ENTER to launch you request.
The projector acts as a webserver and returns its start up page. (image B-1)
Image B-1
Start up screen
Information on the Start Up page.
The nick name of the projector is shown in the middle of the screen. E.g. default indicated as 'Barco - projector'. Below the loca-
tion of the projector, default indicated as 'Location'. This name and location can be replaced by any other name or location, see
Configuration window / Settings.
B.3 Control manager Start Page
Starting up
1. Click on Enter to start up the Barco Control Manager.
The Control Manager start page will be displayed. (image B-2)
126 R5976386 BARCOSLM G8 20/10/2004