Security Settings - Planet Networking & Communication VIP-255PT User Manual

Field
Check New config
Scheduling (Data)
Autoprovision Now
Auto Upgrade when Power On
Auto Provision Server
Remote Maintenance Server

Security Settings

Advanced user could change the login username and the password in this page. This "Enable Change
Account" parameter defines whether enable user to change the registered account.
Description
The device will according to the below ways to check.the
new configuration.
- Power On (+ Scheduling):
The machine will check the new firmware when
power on and following the scheduling date and
time.
- Scheduling:
The machine will follow the scheduling date and
time to check the new firmware.
The machine will check the new configuration between
the time range by random.
Recheck new configuration immediately.
When you set yes, it will auto update the firmware when
power on. The default is enabled.
Auto Provision Server's IP address or Domain name
provided by ISP.
Remote Maintenance Server's IP address or Domain
name provided by ISP.
Figure 25. Security setting page
28