Vlan Configuration - Planet Networking & Communication VIP-255PT User Manual

Field Type Description
If you select the Bridge mode, then the two fast enternet port will be
Bridge
transparent.
If you select the Router mode, the SIP phone will work as a router.
Router
After confirming the modification you've done, Please click on the Confirm button to apply settings and
the machine will be reboot to make the settings effective.
Please consult your ISP personnel to obtain proper PPPoE/IP
address related information, and input carefully.
Hint
If Internet connection cannot be established, please check
the physical connection or contact the ISP service staff
for support information.

VLAN configuration

This page defines the VLAN setting in this page. This function needs to co-operate with network
devices which have VLAN function.
Field Type Description
Dispose VLAN ID is add a Tag header after realize enable the VLAN function. The
VID
realized voice packets transfer at the same VLAN. The prerequisite is it must the
same as VLAN of upper switch. The value range are 2~4094.
To setup the user priority
USRPRIORITY
To indicate the Canonical Format.
CFI
• If Enable, it means the header label include RIF field, and the NCIF flag valus
• If Disable, it means the header label does not include RIF field, and the MAC
Figure 11. VLAN setting page
of RIF will to decide the MAC address is Canonical Format or Non-Canonical
Format in frame information.
address is Canonical Format in frame information.
17