Universal Remote Control osiris Owner's Manual page 38

From the RF Settings Menu, select BLAST.
1
Decide whether you are changing the Blaster for all devices or just
2
one of the devices of the Osiris.
BLAST
ALL
DEVICE
EXIT
SELECT
The display changes to a list of the names of your devices. If you have
3
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF set-
tings, then go to Step 4.
Page
Buttons
display the
other page
of devices.
Select the new setting by pressing the desired button, then press SAVE
4
to save your new setting and return to the RF settings menu.
BLAST
SELECT
O s i r i s
Select ALL to change the blaster settings to
ALL devices in the Osiris. Then, go to Step 4.
Select DEVIC to change the blaster settings to
just one of the devices in the Osiris. Then, go
to Step 3.
BLAST
SELECT
ON
OFF
SAVE
EXIT
TV
CABLE
DVD
VCR
AUDIO
Turn Blaster ON.
Turn Blaster OFF.
Save the new setting
Exit this Menu without changing
the BLAST settings
36
Select a device