Universal Remote Control osiris Owner's Manual page 34

will receive commands from the Osiris unless it is set to IR only.
1
From the RF Settings Menu, select IR/RF.
2
Decide whether you are changing the Signal for all devices or just
IR/RF
ALL
DEVICE
EXIT
SELECT
3
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF set-
Page
Buttons
display the
other page
of devices.
4
Select the new setting by pressing the desired button, then press SAVE to
IR/RF
SELECT
O s i r i s
one of the devices of the Osiris.
Select ALL to change the signal settings to ALL
devices in the Osiris. Then, go to Step 4.
Select DEVIC to change the signal settings to
just one of the devices in the Osiris. Then, go
to Step 3.
IR/RF
save your new setting and return to the
RF
set-
IR/RF
IR tings
RF
menu.
SAVE
EXIT
TV
CABLE
DVD
VCR
AUDIO
SELECT
Both IR and RF will be output
Only IR line-of-sight
Only RF will be output
Save the new setting
Exit this Menu without changing
the IR/RF settings
32
tings, then go to Step
4.
Select a device