Blast - Setting The Front Panel Blaster On Or Off - Universal Remote Control osiris Owner's Manual

The display changes to a list of the names of your devices. If you have
3
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change Emitter
settings, then go to Step 4.
Page
Buttons
display the
other page
of devices.
Select the new setting by pressing the desired button, then press
4
SAVE to save your new setting and return to the RF settings menu.
EMITT
SELECT

BLAST - Setting the Front Panel Blaster On or Off

The MRF-200 and MRF-300 Base Stations have a configurable
front panel high power IR LED or "blaster" for controlling compo-
nents in the same cabinet space without emitters attached to their
front panel. The front panel blaster can overpower or saturate the
sensors of some A/V components, so if intermittent operation
occurs, the blaster should be turned off.
The blaster is incompatible with a stack of identical components,
since all components will receive IR commands at once, no mat-
ter what device is selected. Turn off the front panel blaster by fol-
lowing the steps described on the next page:
M X - 3 5 0
EMITT
SELECT
ALL
UP
DOWN
SAVE
EXIT
TV
CABLE
DVD
VCR
AUDIO
Displays the Line Output # or ALL
Change the Line Output upwards
Change the Line Output downwards
Save the new setting
Exit this Menu without changing
the EMITT settings
35
Select a device