Related Manuals for Universal Remote Control Medius TX-1000 Complete Control
Summary of Contents for Universal Remote Control Medius TX-1000 Complete Control
-
Page 1: Operating Your System
Operating Your System With The Medius TX-1000 ™ COMPLETE COMPLETE CONTROL Universal Remote Control ®... - Page 2 TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice. Complete Control is a registered trademark of Universal Remote Control, Inc. Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
-
Page 3: Table Of Contents
Introduction LCD Touch Screen Optional RF “No Rules” Operation Installing Batteries Programming the Medius Selecting a New “Activity” Using the Medius to Control an “Activity” Displaying the Setup Screen Selecting from the Setup Screen Setting the TIME Setting the LCD Light Settings Sound Volume System Settings... -
Page 4: Introduction
Congratulations! You’ve purchased a unique synthesis of hardware and software engineering, the Complete Control Medius. The Medius achieves a magnificent combina- tion of power and flexibility, simplifying and automating operation of even the most complex system. One Touch Multi-Color Backlighting Simply press the LIGHT button to backlight the screen. -
Page 5: Optional Rf "No Rules" Operation
Optional RF “No Rules” Operation In combination with a Complete Control RF Base Station, the Medius can control your system without being in line-of-sight of the equipment. Any of the Complete Control MRF series of RF base stations is compatible with the Medius. -
Page 6: Installing Batteries
EDIUS WNERS ANUAL Installing Batteries Open the battery cover by depressing the release latch and pulling back the cover on the back of the control. Remove the cover. Observe the + and - polarity indica- tions inside the battery compartment. Place the four AA batteries into their positions in the battery compartment observing the + and - polarity indica-... -
Page 7: Programming The Medius
ANUAL Programming the Medius The Medius is programmed via a Windows PC equipped with a USB port (programming cable included), using our proprietary software, TX-1000 Editor. You can download this software from our website: www.universalremote.com Basic setup takes only a short time with this software. However, to fully... -
Page 8: Selecting A New "Activity
Selecting a New “Activity” The Medius’s WATCH and LISTEN buttons display the activities you can control with your Medius. When you want to watch something else (a DVD movie, a videotape or an HDTV broadcast), simply press the WATCH button and select the new activity. When you want to listen to the radio or to a CD, touch the LISTEN button and select what you would like to listen to. -
Page 9: Using The Medius To Control An "Activity
Using the Medius to Control an “Activity” Once you’ve selected a new activity, the Medius displays the title of the activity at the top of the screen. Below the title, the LCD displays the cus- tomized names of any special features you need for the activity. All the hard buttons of the Medius have now changed to functions optimized for this activity. -
Page 10: Displaying The Setup Screen
EDIUS WNERS ANUAL Displaying the Setup Screen You can adjust the settings of the Medius whenever you like by pressing and holding both the WATCH and the SEL button at the same time for three sec- onds. When you do, the screen will change to the SETUP screen. If you do not press any button on the SETUP screen within 30 seconds, the Medius will time out and automatically return to normal operation. -
Page 11: Setting The Time
Setting the TIME You can correct the time displayed by changing the settings on this screen. To activate the AM/PM setting, press this button. . To activate the HOUR setting, press this button. To activate the MINUTE setting, press this button. To SAVE any changes you have made, press SAVE. - Page 12 Your professional installer may have set the color of the backlighting to display different colors when you change activities. You can override the settings he/she made in the TX-1000 software with one constant backlight- ing color for all activities Press the COLOR...
-
Page 13: Light Settings
Light Settings You can adjust the backlighting of the remote in three additional ways: 1. You can turn on/off the LCD backlighting. 2. You can turn on/off the hard button backlighting. 3. You can select the amount of time the lighting stays on after the last button press. -
Page 14: System Settings
System Settings You can set your Medius to display the Low Battery warning at a power level between 0% and 20% (in 5% increments). To activate the battery low warn- ing row, press the WARN button. The amount of available memory left to utilize is dis- played in this row. -
Page 15: Version Information Displays
Version Information Displays Should you be curious, the Version indicates what firmware and software versions were used to program your Medius. Warranty The Medius is covered against any manufacturing defects or faults in workmanship for a period of one year from the date of purchase when purchased from an authorized Complete Control dealer. - Page 16 ™ COMPLETE COMPLETE CONTROL Universal Remote Control ® 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com...
Need help?
Do you have a question about the Medius TX-1000 Complete Control and is the answer not in the manual?
Questions and answers