Hardware Specifications - TYAN Single S1662S User Manual

1.2 Hardware Specifications/Features
wCPU
wCoprocessor
wSpeed
wDRAM
wL2 Cache
wEIDE Controller
wEnhanced I/O
wMouse
wI/O Bus Slots
S1662-AT-001 http://www.tyan.com
Intel Pentium Pro 150 thru 200 MHz (Socket 8)
(Single or Dual CPU configuration)
On-chip floating point unit
60/66 MHz system bus
30/33 MHz PCI bus
7.5/8.33 MHz ISA bus speed
4 double banks of 72 pin SIMM sockets
Supports 5V or 3.3V memory
Supports BEDO(Burst Extended Data Out)
Supports EDO(Extended Data Out) DRAMs
Supports ECC(Error Correcting Code)w/ parity
Supports Fast Page Mode DRAMs
Supports 8MB to 1024MB of DRAMs
256/512KB 2nd level cache in CPU
Primary and secondary PCI EIDE channels on
board for support of up to four EIDE Mode 0
through Mode 4 drives
Supports DMA(Bus Master) mode 1 and 2.
( Bus Master driver on web at www.tyan.com)
Multi-mode bi-directional parallel port that
supports standard, EPP and ECP modes.
Supports 16550 compatible UARTS for on-board
high speed serial ports.
Support for an IrDA compliant InfraRed inter-
face.
On-board floppy controller.
On-board Univeral Serial Bus controller.
On-board PS/2 mouse connector.
5 Master/Slave PCI-Bus
3 ISA Bus (One ISA and one PCI shared slot)
4