Chapter 3 Operations; Manual Key; Hot Key And Mouse Clicking; Osd (On Screen Display) - Planet KVM-810 User Manual

Chapter 3 Operations

3.1 Manual Key

It is the simplest switching method. You just need to press the Port Selection
Switch on the front panel of the KVM. The Selection LED (Red) is on, indicating
that you are switching to the corresponding port.
1. The Port Selection Switch functions only when connected to a
PC.
2. If the Offline Skip of the OSD System Setting is Auto, then you
can not make any switch when pressing an offline Port Selection
switch.
Note
3. For Auto Scan Mode, none of the Port Selection Switches func-
tions

3.2 Hot Key and Mouse Clicking

Hot key and mouse clicking are applicable for switching a small section. You can
select the SVS (Smart View Setting) from the OSD of the PC first (for a quick
switch of PC) and use the keyboard (press the Ctrl key twice) or the mouse (press
and hold the middle button while pressing the left or right button) to switch to the
previous or next set of PC.
The mouse must have at least 3 keys. As far as you select a PC with the SVS, you
can use this method for the switch.

3.3 OSD (On Screen Display)

Press the NumLock on the keyboard twice or simultaneously press the Push
Buttons 1 and 2 of the Port Selection Switch on the KVM panel to start the OSD.
Use the key Up, Down and Enter keys on the keyboard to switch or directly move
the mouse to the target PC, and then double click the left button.
Additionally, you also can use the numeric keys to enter the direct switch. For
example, if you want to switch a PC to the Slave KVM port 04 under the Master
KVM port 03, then you can start the OSD and then directly enter 0304. If you are
using a standalone machine, then just enter the first two digits.
More OSD related information is given in the following OSD sections.
Start
Press the NumLock twice or the Port Selection Switches 1 and 2 on the panel to
enter the OSD.
13