Planet KVM-810 User Manual page 19

Security Mode: Switch the Security Level from "None" to "Low" in the System
Setting, and enter your Password ("A~Z", "0~9", a maximum of
12 characters), and the security will be effective after you confirm
the Password. The use of the Console Lock Time is to set the
time to enter a security mode after the keyboard and mouse has
idled for a predetermined time. Once you enter into the security
mode, you need to enter the correct password before you can
move the mouse or enter any key from the keyboard. You need
a correct password to operate the whole system normally.
Important Note: What should I do if I forgot my Password?
After you enter a wrong password for 5 consecutive times, a time delay bar will
appear, and a set of "Magic Numbers" will show up at the bottom.
Record the magic numbers and contact with your distributor.
Console - Reconfirmed: Simultaneously press the largest two numbered Port
EDID & DDC: A vast majority of computer monitors supports the Extended Display
Identification Data (EDID) and allows data access by Display Data
Channel (DDC). The KVM also supports these two specifications, but
the KVM only reads the EDID of the Monitor when the KVM is on. If
it is necessary to change monitors during an operation, please use
the Console Reconfirmed function to read the EDID again.
Selection Switches on the panel to start the Console-
Reconfirmed. If you change the Console equipment,
please use this function to let KVM reconfirm the
equipment at the Console end once.
19