Table of Contents
Advertisement
Console Operations
4-1
C h a p t e r 4
Console Operations
Software Setup
Web Hub's internal software must be configured to enable its management
features. The first time, a minimal configuration must be done using the System
Console, thereafter further configuration, monitoring and other management can
be done several ways, including the System Console, Web Management and
SNMP management.
Configuring the System
To configure the system, connect an RS-232 serial cable to a COM port on a PC
or notebook computer and to the serial port of the Master Hub as show below.
Note:
Do not use a null mode cable.
Figure 4.1 Connecting a PC via Console Port.
Terminal Program
WH-2400M / WH-2400S User's Manual
Advertisement
Table of Contents
