Planet KVM-810 User Manual page 15

03-04:Mail Ser 4
LIST: Mail Group
PWR C#
●
●
●
●
: Move
F1: Smart View
F4: Auto Scan
F5: Clear Name List
1. This field provides the information of the currently connected PC. As shown in
the figure above, 03 refer to the Port Number of the Master; 04 refer the Port
Number of the Slave; and Mail Ser 4 is the name of this PC defined by Users. If
a PC connects to the Master, then the number consists of the first two digits. If
a User has not given a name for the PC, the name field will be blank.
2. This field shows the list of the Master KVM or a certain set of Slave KVM
currently displayed on the OSD. We recommend you to give a name to the Slave
KVM, or else the display after LIST: will be blank.
3. This field shows the list of connections to the KVM, and the fields are described
below: PWR: It shows the status of power supply and indicates a normal power
supply for the equipment (PC or KVM) connected to the CPU port.
C#: It shows the channel number; the CM-1204 will display 01~04; the CM-1208
will display 01~08 and the CM-1216 will display 01~08; 09~16 (Since the
screen cannot display all at a time, therefore you can use PgUp/PgDn to
switch the pages).
KVM: It shows the KVM model. If there is a number in this field, it shows that a
set of KVM connects to this port. The number 04 indicates Port 4 and 08
indicates Port 8 and 16 indicates Port 16 and so on.
If the connected KVM is not on, there will have no number in this
field.
Note
NAME: It shows the name of the equipment, and users can name the Slave KVM
or PC on their own. There are a total of 12 characters selected from the group of
"A~Z", "a~z", "0~9" , "+" , "–" , " * " , "/" , "=" , "[" , "]" , " , " , "·" , " : ".
Slave List
KVM
01
02
03
04
Space: Edit
Enter: Switching
F9: System Setting
NAME SVS
Mail Ser 1
Mail Ser 2
Mail Ser 3
Mail Ser 4
Esc: Exit
15