Table of Contents
Advertisement
4
Edit the encryption key:
• Base 16: Enter the key as
described on page 73. 64-bit
keys require 10 digits, 128-bit
keys 26 digits, TKIP and AES
keys 64 digits.
• ASCII: Enter the key as described on page 26. 64-bit keys are 5
characters long, 128-bit keys 13 characters long, TKIP and
AES keys 8 to 63 characters long.
Note that depending on the device and the key setting used,
the UT-1 may fail to connect. If this occurs, try choosing a
different key setting.
5
Return to the wireless menu
(2/2).
Key index: In infrastructure networks
that use WEP encryption, choose the key
index used by the host or access point.
1
Choose an index.
2
Return to the wireless menu
(2/2).
77
Menu Guide
Advertisement
Table of Contents
