Preparing The Ut-1 - Nikon UT-1 User Manual

Preparing the UT-1

Inserting the Battery
To prevent loss of power during setup or upload, use a fully-
charged battery or an optional AC adapter. The UT-1 takes one
EN-EL15 rechargeable Li-ion battery; other batteries can not be
used.
1
Slide (q) and open (w) the battery-
chamber cover.
2
Insert the battery in the orientation
shown. For safety precautions and
information on charging the battery, see
the battery and charger manuals.
3
Close the battery-chamber cover.
10
Introduction