Troubleshooting - Nikon UT-1 User Manual

Troubleshooting

Problem
"POWER" LED does not
light.
Wireless transmitter
option not available.
The Device info, and
Device settings menus
cannot be selected.
Excessive radio
interference.
All LEDs flash at once.
Camera displays TCP/IP or
FTP error.
Camera displays wireless
error.
Camera displays "Ethernet
cable is not connected".
Memory card error
displayed.
Solution
• Turn the UT-1 on.
• Confirm that the battery is
inserted and fully charged.
Confirm that the UT-1 is
connected and on.
Confirm that the UT-1 is
connected and on.
Adjust the position of the wireless
access point or host computer.
UT-1 hardware or battery
malfunction. Contact a Nikon-
authorized service representative.
• Check settings for host and/or
wireless LAN adapter and adjust
camera settings appropriately.
• Check firewall settings.
• Confirm that host and wireless
LAN adapter are on.
• Ensure that there are no
obstacles between UT-1 and
wireless LAN adapter.
• Check settings for host and/or
wireless LAN adapter and adjust
camera settings appropriately.
Connect Ethernet cable or
change interface setting to
Wireless & Ethernet.
Confirm that memory card is
properly inserted.
Page
35, 43, 64
10, 92
33, 42, 62
33, 42, 62
—
—
28, 56, 73
7
—
—
28, 56, 73
25, 53, 118
—
119
Appendices