Table of Contents
Advertisement
Device Settings
Format the transmitter's internal memory and choose the delay
before the UT-1 turns off automatically. This option is only
available when the UT-1 is connected to the camera via USB and
the UT-1 is on. On the D4, the options in the D800 Device info and
Device settings menus can be found under Network > Device
info and settings.
Auto Power Off
Set the time delay until the UT-1 power
automatically turns off after the USB
connection between the camera and UT-1 is
terminated.
Option
The UT-1 does not turn off
Always On
(default)
automatically.
Choose the delay before the UT-1 turns
Auto off
off automatically from 30 seconds,
delay
1 minute, 10 minutes, and 30 minutes.
Format Transmitter's Memory
The UT-1 has no built-in memory and does not support this
option.
Description
93
Menu Guide
Advertisement
Table of Contents
