Pioneer PDP-60MXE20 Technical Manual page 178

RS-232C Adjustment
7 "INTEGRATOR"–"OPTION" related commands
Command
Command Command
434CMX
425CMX 60MXE20
505CMX
SCREEN MASK
+ +
FMK
+ +
FMKS00
+ +
FMKS02
+ +
FMKS03
+ +
FMKS04
+ +
FMKS05
+ +
FMKS06
+ +
FMKS07
SIDE MASK
+ +
RSL
+ +
GSL
+ +
BSL
+
– SMAS00
+
– SMAS01
VIDEO WALL
+
+
MGF
+ +
MGFS00
+
– MGFS11
+
–
MGFS12
+
–
MGFS13
+
– MGFS14
+
–
MGFS15
+ +
MGP
+ +
MGPSnn
+
–
IDA
+
–
PDES00
+
– PDES01
+
–
PDES02
+
–
LNKS00
+
– LNKS01
RS-232C
+ +
BRA
+ +
BRAS01
+ +
BRAS02
+ +
BRAS03
+ +
BRAS04
+ +
BRAS05
+ +
BRAS06
ID NUMBER
+ +
IDC
+ +
IDS
178
Function
Displays the present set value of SCREEN MASK.
Sets SCREEN MASK to OFF.
Sets SCREEN MASK to inverse (negative – positive reversed).
Sets SCREEN MASK to white mask.
Sets SCREEN MASK to red mask.
Sets SCREEN MASK to green mask.
Sets SCREEN MASK to blue mask.
Sets SCREEN MASK to yellow mask.
Adjusts side mask RED.
Adjusts side mask GREEN.
Adjusts side mask BLUE.
Sets AUTO SIDE MASK to OFF.
Sets AUTO SIDE MASK to ON.
Displays the set value of VIDEO WALL.
Sets VIDEO WALL to OFF.
Sets VIDEO WALL to DIVIDER:1.
Sets VIDEO WALL to DIVIDER:4.
Sets VIDEO WALL to DIVIDER:9.
Sets VIDEO WALL to DIVIDER:16.
Sets VIDEO WALL to DIVIDER:25.
Displays the present VIDEO WALL (accounting/not accounting
for expanded position/joints) setting.
nn=01 to 04: Sets display position during DIVIDER=2 x 2 (not
accounting for joints).
nn=05 to 08: Sets display position during DIVIDER=2 x 2
(accounting for joints).
nn=10 to 18: Sets display position during DIVIDER=3 x 3 (not
accounting for joints).
nn=20 to 28: Sets display position during DIVIDER=3 x 3
(accounting for joints).
nn=30 to 3F: Sets display position during DIVIDER=4 x 4 (not
accounting for joints).
nn=40 to 4F: Sets display position during DIVIDER=4 x 4
(accounting for joints).
nn=50 to 68: Sets display position during DIVIDER=5 x 5 (not
accounting for joints).
nn=70 to 88: Sets display position during DIVIDER=5 x 5
(accounting for joints).
Executes AUTO ID setting.
Sets POWER ON DELAY mode to OFF.
Sets POWER ON DELAY mode to ON (other than cases used for
a higher than 16 screen system) or mode 1 (used for a higher
than 16 screen system).
Sets POWER ON DELAY mode 2 (used for a higher than 16
screen system).
Sets ABL link to OFF.
Sets ABL link to ON.
Displays the present set value of baud rate.
Sets the RS-232C baud rate to 1200 bps.
Sets the RS-232C baud rate to 2400 bps.
Sets the RS-232C baud rate to 4800 bps.
Sets the RS-232C baud rate to 9600 bps.
Sets the RS-232C baud rate to 19200 bps.
Sets the RS-232C baud rate to 38400 bps.
Clears the ID number.
Sets the ID number.
Number direct
Effective Minimum Maximum
000 255
000 255
000 255
Last
Comment
memory
New
New