Operating Your Washing Machine - Simpson EZI Sensor SWT801 User Manual

OPERATING YOUR WASHING
MACHINE
Starting Your Washing Machine
1. Turn on the taps and turn power on at the
power point.
2.
Press On-Off switch button to switch ON
the machine.
3. Close the lid.
If the settings shown on the control panel are what
you want to use and the Program SELECTOR is
set to the correct wash program for your clothes
load, touch the Start/Hold To Pause (
to start your wash. To select a different program or
change other settings, read the following
instructions
Choose the Wash Program
touch the icon to choose the wash progam you
want. The relevant light will light up.
The table "YOUR PROGRAM GUIDES" shown on
page 8 will help you in selecting the right program.
Once you select a wash program, the program
selected will stay at that position for the whole of
the wash.
Simpson

Operating Your Washing Machine

7
You can select a new program position at any time.
If you do move the Program ICON after you have
started a wash program, the effect will be different
depending on the status of the machine at the
time, as follows:
1. When the machine is running, selecting the
program ICON to a new position, machine will
show "
beeps to indicate the button is disabled.
2. If you pause the machine, selecting the program
) button
ICON to a new position will result in the
machine resetting to the start of the new
program.
" on the display with three short
ERR