KVH Industries TracVision M5 User Manual page 47

8. After waiting 15 minutes, repeat Steps 4-6 to run a
second Check Switch test.
9. Verify the values on your TV match those required for
your selected DISH 1000 configuration (see
Figure 3-13 and Figure 3-14). If your values do not
match, turn off the antenna, then turn it back on and
repeat Steps 4-8.
Figure 3-13 DISH 1000/61 Second Check Switch Results on TV Screen
1
Port
119
Satellite
OK
Trans
Reception Verified
Status
SW64
Switch
Figure 3-14 DISH 1000/129 Second Check Switch Results on TV Screen
1
Port
119
Satellite
OK
Trans
Reception Verified
Status
SW64
Switch
10. Exit the menu and allow the receiver to download the
program guide.
NOTE: You do not need to perform this procedure again unless you add
another receiver, you reconfigure a receiver(s) for home use, or you move to a
different DISH 1000 satellite coverage area (see "DISH 1000" on page 15).
TracVision M5/M7 User's Guide
2 3
110 61
OK OK
2 3
110 129
OK OK
Chapter 3 - Settings
45