Blower Cord Installation - Left Side - Quadra-Fire 41I-ACC Owner's Manual

R
G. Blower Cord Installation on Left Side
The blower cord is shipped on the right side of the appli-
ance. You may relocate the cord so it is on the left side.
Relocating Blower Cord to Left Side
1. Remove the convection blower housing from the appli-
ance by removing two 5/32 allen head bolts.
2. Remove Blower assembly from appliance by remov-
ing two 8/32 phillips head screws located under ashlip.
Figure 42.1.
3. Using phillips head screw driver, remove snap disc
bracket and cord restraint bracket from right side. Figure
42.2
4. Re-install snap disc bracket and cord restraint bracket to
left side of blower housing. Figure 42.3.
5. Re-install blower housing and blower assembly in
reverse order.
Blower Assembly
5/32 Allen Bolts
(x2)
Blower Housing
Figure 42.1
September 15, 2011
Figure 42.2
8/32 screws
(x2)
7045-178
41I ACC Wood Insert
Page 43