Setup; System Setting - LevelOne WCS-2030 User's Manual & Installation And Servicing Instructions

Setup

When you select one or multiple devices (of the same model) , the "Setup" button will
be enabled. Click on it to modify the settings of the selected device(s). After clicking on
the "Setup" button, Installation Wizard will try to connect to the selected device(s). If
the authentication is failed, it will popup a dialog) to ask for correct password and http
port number.
The default password is the MAC address of your own FCS-1030, which marks at the
bottom label of each device.
Please enter the MAC address with capital letters.

System Setting

After connected to the selected device(s), it will switch to system setting page.
Click on this button to back to the previous page or main page
Click on this button to keep the settings and go to the next page.
Click on this button to discard the settings of the current page and go to
the next page.
16