Chapter 2
Basic Setup
This Chapter provides details of installing and configuring the FCS-
0010/WCS-0010.
System Requirements
•
To use the wired LAN interface, a standard 10/100BaseT hub or switch and
network cable is required.
•
To use the Wireless interface on the Network Camera, other Wireless devices
must be compliant with the IEEE802.11b or IEEE802.11g specifications. All
Wireless stations must use compatible settings.
The default Wireless settings are:
Mode: Infrastructure
ESSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
2
7