2.
Preparations for IP Camera Setup
This chapter provides information about system requirements for IP Camera
operation, power connection, Ethernet connection and ways to access to the
camera.
2.1
System Requirements
To perform the IP Camera via web browser, please ensure your PC is in good
network connection, and meet system requirements as described below.
Items
Personal Computer
Operating System
Web Browser
Network Card
Viewer
2.2
Installation
Please follow the instructions below to complete IP Camera installation.
Lens Mounting: CS Mount Lens
Power Connection
To power up the IP Camera, please plug the camera's DC 12V cable into the
power outlet. Alternatively, connect the Ethernet cable to the camera's PoE port
and plug the other end of the cable into a PoE switch.
6
System Requirement
1. Intel
2. 2 GB RAM or more
Windows VISTA or Windows XP
Microsoft Internet Explorer 6.0 or later
10Base-T (10 Mbps) or 100Base-TX (100 Mbps) operation
ActiveX control plug-in for Microsoft IE
NOTE: If using PoE, make sure Power Sourcing Equipment (PSE) is in
use in the network.
○
○
Pentium
M, 2.16 GHz or Intel
R
R
2.0 GHz
○
TM
Core
2 Duo,
R