File Selection; Upgrade - LevelOne WCS-2030 User's Manual & Installation And Servicing Instructions

File Selection

You can use the file combolist to browse the file that you want upgrade onto the
selected device(s). After selecting the file, Installation Wizard will check whether the
file you selected is correct. If it is correct, then the package information will display the
information about the file and enable the "Upgrade" button. Therefore you can click
on the button to upgrade the firmware. If it is not correct, then it will popup a warning
message.

Upgrade

Click on the "Upgrade" button to upgrade the firmware of the selected device(s). It
will popup the dialog to show the progress of the upgrading process.
After the upgrade process is done. Click "Done" to finish.
22