Fix The Ip Address; Basic Network Settings - LevelOne WCS-2030 User's Manual & Installation And Servicing Instructions

Fix the IP address

Check "Reset IP address at next boot" will force Network Camera to reconfigure its
IP address whenever it reboot. If you want the Network Camera to use a fixed IP,
please uncheck the "Reset IP address at next boot" and assign a valid IP address.
If you select more than one device, changing the IP address is not allowed and the IP
address field will be disabled.

Basic Network Settings

You can setup the network setting by this page. Usually this is no need to be changed,
if you do change it please make sure you input the correct setting or the device may not
19