D-Link.storage.utility - D-Link ShareCenter DNS-320 User Manual

Section 3 - Installation
When.first.powered.on,.during.the.initial.boot.sequence,.the.device.will.wait.to.be.assigned.an.IP.address.via.DHCP..If.it.does.
not.receive.a.DHCP.assigned.IP.address.the.Auto-IP.process.will.assign.a.169.254.xxx.xxx.address.to.the.device.If.you.want.to.
change.the.IP.address.before.logging.in.or.are.unable.to.connect.to.the.ShareCenter.Pulse.IP.address,.you.can.use.the.Storage.
Utility.provided.on.the.product.CD.to.locate.the.device.on.your.network.and.make.any.needed.changes.
Network Storage The. D-Link. Storage. Utility. displays. any. ShareCenter. Pulse. devices. it.
Device:
detects.on.the.network.
Refresh: Click.to.refresh.the.device.list.
Configuration: Click. Configuration. to. access. the.Web-based. configuration. of. the.
ShareCenter.Pulse.
LAN: Configure.the.LAN.Settings.for.the.ShareCenter.Pulse.here.
Apply: Click.Apply.to.save.and.activate.the.changes.to.the.LAN.Settings.
Drive Mapping: Volumes.available.for.mapping.are.displayed.here.
Available Drive Select.an.available.drive.letter..Click.Connect.to.map.the.selected.volume..
Letters: Click.Disconnect.to.disconnect.the.selected.mapped.volume.
About: Click.About.to.view.the.software.version.of.the.D-Link.Storage.Utility.
Exit: Click.Exit.to.close.the.utility.
D-Link DNS-320 User Manual
D-Link Storage Utility
20