4. O
PERATING
Operation
Stand-Alone Mode (Sound-Active):
This mode allows a single unit to run to the beat of the music. See the settings below for details on
this operation.
Stand-Alone Mode (Manual):
Manual
DIP switch
1 – 4
5 – 8
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. If you are unfamiliar with
DMX, please read the "DMX Primer section".
DMX Channel Values
C
HANNEL
1
2
Blinder Function
To trigger the Blinder function, you must have the following combination of DMX values.
C
HANNEL
1
2
Note: To disable the Blinder function after it has begun, channel 1 must be set at a value of 0 or 212-
255.
DMX Mega Strobe™ III User Manual
I
NSTRUCTIONS
1.
Set all DIP switches to the Off position.
1.
Set Dip switch #10 to the Off position.
2.
Set Dip switch #9 to the On position.
3.
The following assignments will result modification of the other DIP switches.
Function
Speed
Intensity
1.
Set DIP switch #10 to the On position.
2.
Use DIP switches 1-9 to set the DMX starting address.
V
F
ALUE
UNCTION
Speed/ Mode
000 211
Slow Fast
212 255
Sound triggering mode
Dimmer
000 255
Low High
V
F
ALUE
UNCTION
Speed/ Mode
000 042
No function
043 211
Blinder (requires CH.2 to be at DMX value 000)
212 255
No function
Dimmer
000 000
No function (required for Blinder effect)
10
6/11/2009 1:02 PM