Table of Contents
Advertisement
Quick Links
Technical Specifications
Power
AC 120V~60Hz
Fuse
20mm Glass 6.3A Fast Blow
1 x 24V 250W
Lamps
Part No. ELC3 24V 250W (300 Hrs)
Dimension
290mm x 330mm x 380mm / 11.42in x 12.99in x 14.96in
Weight
11 kgs / 24.2 lbs
User Information (Please complete for your records)
Data Purchased :
/
/
Serial No. :
Dealer Stamp :
Model : Mini Legend DMX-425
AC 230/240V~50/60Hz
20mm Glass 5A Fast Blow
Mini Legend
DMX-425
User Guide
Please read these instructions carefully before use
World-wide Headquarters:
th
3000 North 29
Ct., Hollywood, Florida, USA, FL 33020
Tel: +1-954-929-1115 Fax: +1-954-929-5560
www.chauvetlighting.com
Advertisement
Table of Contents
Related Manuals for Chauvet Mini Legend DMX-425
Summary of Contents for Chauvet Mini Legend DMX-425
- Page 1 User Information (Please complete for your records) User Guide Please read these instructions carefully before use Data Purchased : Serial No. : Dealer Stamp : Model : Mini Legend DMX-425 World-wide Headquarters: 3000 North 29 Ct., Hollywood, Florida, USA, FL 33020 Tel: +1-954-929-1115 Fax: +1-954-929-5560 www.chauvetlighting.com...
-
Page 2: Table Of Contents
7. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. -
Page 3: Safety Instruction
G. If The pan belt is broken 1. Turn off the main power. 1. Safety Instruction 2. Unscrew all the screws (A) and open the base-housing cover (B). Please read carefully the instruction, which includes important 3. Unplug all the connect wires (C) that from the arm to PC board and ignitor. information about the installation, usage and maintenance. -
Page 4: Technical Specification
6. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: Warning To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. Never touch bulb with bare fingers as it is very hot after using. -
Page 5: Connection
5.4. DMX512 Configuration DMX512 CONFIGURATION CHANNEL 1 CHANNEL 2 CHANNEL 3 CHANNEL 4 CHANNEL 5 5.5 DMX512 Connection SHUTTER GOBO COLOR TILT The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. Fast Fast 540¡ã 270¡ã... -
Page 6: Lamp
3. Lamp 2. LED DMX input present In case of replacement of the lamp or maintenance, do not open the MASTER master mode fixture within 15 minutes until the unit cools down after switching off. SLAVE slave mode SOUND Flashing sound activation Lamp : 3. - Page 7 5.3 Universal DMX Controller constantly on. If you use a universal DMX controller to control the units, you have to set DMX address 2-light show from 1 to 512 channel so that the units can receive DMX signal. (slave mode), means the unit works normally and means 2-light Press the MENU button up to when the...
- Page 8 Once the address has been selected, press the ENTER button to setup or automatically return Display Inversion to the main functions without any change after 8 seconds. To go back to the functions without It is good for you to install the unit on the floor or under ceiling. Press the MENU button up any change press the MENU button again.
Need help?
Do you have a question about the Mini Legend DMX-425 and is the answer not in the manual?
Questions and answers