Table of Contents
Advertisement
Mounting
Orientation
This fixture may be mounted in any safe position, provided there is adequate room for ventilation.
Rigging
The fixture includes a mounting yoke to which a rigging clamp can be attached. You must supply your
own clamp and make sure the clamp is capable of supporting the weight of this fixture. You can order
"C" and "O" clamps from any CHAUVET dealer or distributor (CLP-15, CLP-06 recommended).
If you are using this fixture for down lighting, you must use at least one safety cable/chain for
each fixture in addition to the double-bracket yoke.
If hanging the fixture for overhead use, please follow the below steps:
1)
Block access below the work area and use a suitable and stable platform when installing or
servicing fixture.
2)
Always use safety cables. The safety cable must be capable of holding 10 times the weight of
the fixture.
3)
Verify that the structure can hold 10 times the weight of all to-be installed fixtures.
Hanging Clamp
The hanging clamp is sold separately
COLORdash™ Block User Manual
9
Double-bracket yoke
Blocks 1-4
6/19/2009 4:54 PM
Advertisement
Table of Contents
