Setup; Ac Power - Chauvet COLORdash Par User Manual

3. SETUP

AC Power

This fixture has an auto-switching power supply that can accommodate a wide range of input
voltages. The only thing necessary to do before powering on the unit is to make sure the line voltage
you are applying is within the range of accepted voltages. This fixture will accommodate between
100V and 240V AC 50-60 Hz. All fixtures must be powered directly off a switched circuit and cannot
be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is
used solely for a 0% to 100% switch.
This fixture is designed for power linking from one COLORdash™ PAR to another COLORdash™
PAR fixture.
Warning! All fixtures must be connected to circuits with a suitable Earth Ground.
Depending on the application, the lighting fixture may require a different connector Please refer to the
below wire color code if installing a new connector.
Wire
Brown
Blue
Green/Yellow
COLORdash™ Par User Manual
Connection
AC Live
AC Neutral
AC Ground
8
Connection Pin
AC Live 1
AC Neutral 2
Ground(Earth) 3
9/4/2008 12:09 PM