Connecting To A Wap Service - Nokia 6800 User Manual

M e n u f u n c t i o n s
• IP address - Key in the address,
press for a dot, and press
OK. You obtain the IP address
from your network operator or
service provider.
• Authentication type
Secure or Normal.
• Login type - Select
Automatic. If you select
Automatic, the login type uses
the user name and password
keyed in the following settings. If
you select Manual, the login
information is required each time
when establishing a connection.
• User name - Key in the user name
and press OK.
• Password - Key in the password
and press OK.

Connecting to a WAP service

Firstly, make sure that the service
settings of the WAP service that you
want to use have been activated. To
activate the settings:
• Press Menu and select Services,
Settings and Connection
Select Active service settings
scroll to the set you want to
activate and press Activate.
Secondly, make a connection to the
WAP service. There are three ways to
connect:
72
- Select
Manual or
settings.
and
Copyright © 2004 Nokia. All rights reserved.
• Open the homepage of the WAP
service:
Press Menu and select
and Home.
Tip: To quickly open the
homepage of a WAP service
when the flip is closed, press
and hold
mode. When the flip is open,
press the corresponding
number key.
Or:
• Select the bookmark of the WAP
service:
Press Menu and select Services,
Bookmarks, and select a
bookmark.
If the bookmark does not work
with the current active service
settings, activate another set of
service settings and try again.
Or:
• Key in the address of the WAP
service:
Press Menu and select
and then Go to
the address of the WAP service,
press for special characters
(or if the flip is open), and
press OK.
Note that it is not necessary to
add the prefix http:// in front of
the address since it will be added
automatically.
Services
in standby
Services
address. Key in