Connecting To A Wap Service - Nokia 6800 User Manual

Connecting to a WAP service

Firstly, make sure that the service settings of the WAP service that you want to
use have been activated. To activate the settings:
• Press Menu and select Services,
Active service settings
Activate.
Secondly, make a connection to the WAP service. There are three ways to connect:
• Open the homepage of the WAP service:
Press Menu and select
Tip: To quickly open the homepage of a WAP service when the flip is
closed, press and hold
press the corresponding number key.
Or:
• Select a bookmark of the WAP service:
Press Menu and select Services, Bookmarks, and select a bookmark.
If the bookmark does not work with the current active service settings, activate
another set of service settings and try again.
Or:
• Key in the address of the WAP service:
Press Menu and select
the WAP service, press
and press OK.
Copyright
Settings and Connection
and scroll to the set you want to activate and press
Services and Home.
in standby mode. When the flip is open,
Services and then Go to
for special characters (or
‹
2003 Nokia. All rights reserved.
settings. Select
address. Key in the address of
if the flip is open),
138