Nokia 6800 User Manual page 87

When the connection security
is On, the phone tries to use a
secure connection with the
WAP service. If a secure
connection is not available,
the connection will not be
made. If you wish to connect
anyway, with a non-secure
connection, you must set the
connection security to Off.
• Data bearer
or GPRS.
• Bearer settings
the selected bearer, see
"Settings when GSM data is
the selected data bearer"
"Settings when GPRS is the
selected data bearer"
For pricing, connection speed
and other information,
contact your network
operator or service provider.
Settings when GSM data
selected data bearer
• Dial-up number
phone number and press OK.
• IP address - Key in the address,
press for a dot, and press
OK. You obtain the IP address
from your network operator or
service provider.
• Authentication type
Secure or Normal.
- Select GSM data
- Settings for
and
below.
is the
- Key in the
- Select
Copyright © 2004 Nokia. All rights reserved.
M e n u f u n c t i o n s
• Data call type - Select
or ISDN.
• Data call speed
you want to use, or select
Automatic. Automatic
available only if the current
selected data call type is
Analogue. The actual data call
speed depends on the service
provider.
• Login type - Select
Automatic.
• User name - Key in the user name
and press OK.
• Password - Key in the password
and press OK.
• Display terminal window
Yes, if you want the server to
perform user authentication
when you access intranet sites
during a dial-up connection.
Settings when GPRS
selected data bearer
• GPRS access point
access point name and press OK.
An access point name is needed
to establish a connection to a
GPRS network. You obtain the
access point name from your
network operator or service
provider.
Analogue
- Select the speed
is
Manual or
- Select
is the
- Key in the
71