Gprs - Nokia 6800 User Manual

M e n u f u n c t i o n s
IR connection indicator
• When is shown continuously,
the IR connection has been
activated and your phone is ready
to send or receive data via its IR
port.
• When blinks, your phone is
trying to connect to the other
device or a connection has been
lost.
Note that the IR connection
deactivates automatically.

GPRS

GPRS connection
You can set the phone to
automatically register to a GPRS
network when you switch the phone
on. Press Menu and select
Connectivity, GPRS,
connection and Always
When you start an application using
GPRS, the connection between the
phone and the network is
established, and data transfer is
possible. When you end the
application, the GPRS connection
ends but the registration with the
GPRS network remains.
If you select When
registration and connection are
established when required by an
application using GPRS and closed
when you end the application.
68
GPRS
online.
needed, the GPRS
Copyright © 2004 Nokia. All rights reserved.
When the GPRS connection is
established, the indicator
shown on the top left of the display.
If you receive a call or a text
message, or make a call during a
GPRS connection, the indicator
will be shown on the top right of the
display to indicate that the GPRS
connection has been suspended (on
hold).
GPRS modem settings
You can connect the phone via an
infrared or a data cable connection
to a compatible PC and use the
phone as a modem to enable GPRS
connectivity from the PC.
Press Menu and select Connectivity,
GPRS and GPRS modem
Select Active access point
activate the access point that you
want to use. Select
access point to change the access
point settings.
• Scroll to Alias for access point
and press Select. Key in the name
that you would like for the
activated access point and press
OK.
is
settings.
and
Edit active