Summary After Call; Anykey Answer; Send My Caller Identity; Automatic Redial - Nokia 6800 User Manual

M e n u f u n c t i o n s
Select the divert option that you
require, such as Divert if busy
divert the voice calls when your
number is busy or when you reject
an incoming call.
To set the divert setting to on, select
Activate and then select the timeout
after which the call is diverted, if
this is available for the call divert
option. To set the call divert to off,
select Cancel. To check whether the
call divert is activated or not, select
Check status if this is available for
the divert option. Several divert
options may be active at the same
time.
To see the divert indicators in
standby mode, see
indicators in standby mode"
page 4.

Anykey answer

Press Menu and select Settings,
settings and then
Select On and you can answer an
incoming call by briefly pressing any
key, except , selection keys
and , and .

Automatic redial

Press Menu and select Settings,
settings and Automatic
Select On and your phone will make
a maximum of ten attempts to
connect a call after an unsuccessful
call attempt.
44
to
"Essential
on
Call
Anykey answer.
Call
redial.
Copyright © 2004 Nokia. All rights reserved.
Speed dialling
Press Menu, select Settings,
settings and Speed
On and the names and phone
numbers that are assigned to the
speed dialling keys, from
with the flip closed, or the
corresponding number keys of the
keyboard, can be dialled by pressing
and holding the corresponding
number key.
Call waiting
Press Menu and select Settings,
settings and Call waiting. Select
Activate and the network will notify
you of an incoming call while you
have a call in progress (network
service). See "Call waiting"
page 13.

Summary after call

Press Menu and select Settings,
settings and Summary after
Select On and after each call the
phone will briefly display the
duration and cost (network service)
of the call.

Send my caller identity

Press Menu and select Settings,
settings and Send my caller
identity. Select Yes
number will be displayed to the
person you are calling (network
service). Select Set by network
the setting agreed upon with your
service provider is used.
Call
dialling. Select
to
Call
on
Call
call.
Call
and your phone
and