Gprs, Hscsd And Csd; Using Data Communications; Applications - Nokia 6800 User Manual

• Nokia Modem Options contains
settings for HSCSD and GPRS
connections.
• Nokia Connection Manager to
select the connection type
between the PC and the phone.

GPRS, HSCSD and CSD

You can use GPRS (General Packet
Radio Service), HSCSD (High Speed
Circuit Switched Data) and CSD
(Circuit Switched Data,
data services.
For availability and subscription to
high-speed data services, contact
your network operator or service
provider.
Note that the use of HSCSD service
consumes the phone's battery more
quickly than normal voice or data
calls. You may need to connect the
phone to a charger for the duration
of data transfer.
See "GPRS modem settings"
page 68.
GSM data)
on
Copyright © 2004 Nokia. All rights reserved.
P C C o n n e c t i v i t y
■ Using data
communications

applications

For information on using a data
communications application, refer
to the documentation provided with
it.
1. If you use an IR connection:
• Activate the IR connection in
the phone, see
page 67. Make sure that the
connection is active on your
PC.
If you use the cable DKU-5:
• Connect the cable to the USB
port on your computer and to
the connector on your phone.
2. Start using the data
communications application on
the computer.
Note that making or answering
phone calls during a computer
connection is not recommended as it
might disrupt the operation.
For a better performance during data
calls, place the phone on a
stationary surface with the keypad
facing downward. Do not move the
phone or hold it in your hand during
a data call.
"Infrared" on
81