Opening and closing the bonnet
Fig. 134 Bonnet/radiator grille release lever: Release lever
ä
First read and observe the introductory information and safety warn-
ings
on page 164.
Opening the bonnet
›
Pull the release lever under the dash panel
›
The bonnet jumps out of its lock as a result of the spring force.
›
Before opening the bonnet, ensure that the arms of the windshield wipers are
correctly in place against the windshield otherwise the paintwork could be dam-
aged.
›
Pull the release lever in the direction of the arrow
is unlocked.
›
Grab hold of the bonnet and lift.
›
Take the bonnet support out of its holder and secure the opened bonnet by in-
serting the end of the support in the opening
166
General Maintenance
Fig. 135
Securing the bonnet with the
bonnet support
» Fig.
134.
1
» Fig. 134
and the bonnet
2
» Fig. 135
designed for it.
3
Closing the bonnet
›
Lift the bonnet slightly and unhook the bonnet support. Press the bonnet sup-
port into the holder designed to hold it.
›
Let the bonnet drop into the lock carrier lock from a height of around 20 cm –
do not push it in!
›
Check whether the bonnet is closed properly.
Engine compartment overview
Fig. 136 1.8 ltr./118 kW TSI Petrol engine
ä
First read and observe the introductory information and safety warn-
ings
on page 164.
Coolant expansion reservoir
1
Windshield washer fluid reservoir
2
Engine oil filler opening
3
Engine oil dipstick
4
Brake fluid reservoir
5
Battery (below a cover)
6
Note
The location of the inspection points in the engine compartment of petrol and
diesel engines is practically identical.
169
171
167
167
170
171