Skoda Octavia Owner's Manual page 200

›
Pull the locking lever on the headlight as far as the stop in the direction of ar-
row .
C
›
Disconnect the plug connection and carefully remove the head light in the di-
rection of arrow .
D
Installation is carried out in the reverse order.
Changing light bulb for turn signal light (at the front)
ä
First read and observe the introductory information and safety warn-
ings on page 197.
›
Remove the head light » page 198, Headlights.
›
Turn the socket in the direction of arrow OPEN and remove it together with the
indicator light bulb » Fig. 164.
›
Push in the bulb into the socket, turn in an anti-clockwise direction up to the
stop and remove.
›
Insert a new bulb into the socket and turn in a clockwise direction to the the
stop.
›
Insert the socket with the new bulb into the headlamp. Secure it by turning it in
the direction of arrow CLOSE.
Fig. 164
Removing light bulb for turn sig-
nal light
Changing light bulbs for front parking lights and low beam

ä
First read and observe the introductory information and safety warn-
ings on page 197.
In order to facilitate the removal of the socket with the bulb for the parking light,
we recommend to remove first of all the connector for the low beam light bulb.
›
Remove the head light » page
›
Remove the rubber cover
2
›
To replace the bulb for the low beam, turn the connector with the bulb
» Fig. 165 in an anti-clockwise direction up to the stop, remove.
B
›
Replace the lamp, insert the connector with the new bulb and turn in a clock-
wise direction to the the stop.
›
Remove the bulb for the front parking light, remove the holder
›
Remove the faulty bulb from the socket, insert a new bulb, and insert the sock-
et containing the bulb.
›
Insert the rubber cover.

Fig. 165
Removing light bulbs for front
parking lights and low beam
198, Headlights.
» Fig. 163.
Fuses and light bulbs
» Fig. 165.
A

199