Skoda Octavia Owner's Manual page 120

All communication between a telephone and the hands-free system of your vehi-
cle can only be established with the help of the following profiles of Bluetooth
technology.
rSAP - Remote SIM access profile
After connecting the telephone with the hands-free system via the rSAP profile,
the telephone deregisters from the GSM network, and communication with the
network is only enabled by the control unit via the vehicle's external aerial. In the
telephone only the interface for Bluetooth
only use the mobile phone to disconnect from the hands-free system, deactivate
®
the Bluetooth connection or dial the emergency number 112 (only valid in some
countries).
HFP - Hands Free Profile
After connecting the telephone with the hands-free system via the HFP profile,
the telephone continues to use its GMS module and the internal antenna to com-
municate with the GSM network.
Note
The following guidelines must be observed
way radio systems.
Connecting the phone to the hands-free system
To connect a mobile phone with the hands-free system, it is necessary to inter-
connect the telephone and hands-free system. Detailed information on this is
provided in the operating instructions for your mobile phone. The following steps
must be carried out for the connection.
Connecting the telephone with the hands-free system via the rSAP profile
›
®
Activate Bluetooth and the visibility of your mobile phone on your telephone.
For certain mobile phones it is necessary to switch on first the rSAP function.
›
Switch on the ignition.
›
Select the menu Phone - New user in the information display and wait until the
control unit has completed the search.
›
Select your mobile phone from the menu of the units found.
›
Within 30 seconds enter the 16-digit code that is shown on the information dis-
play and confirm it according to the instructions on the display of your mobile
phone.
1)
Does not apply for Radio Swing.
®
remains active. In this case, you can
» page 113, Mobile phones and two-
›
If your SIM card is blocked by a PIN code, enter the PIN code for the SIM card in
®
your phone. The telephone connects to the hands-free system (during the first
connection you can only enter the PIN code in the information display when the
vehicle is stationary, as this is the only situation when you can choose whether
the PIN code should be stored).
›
Follow the instructions in the information display, the first time a new user is
stored.
›
Reconfirm the rSAP command on your mobile phone to download the tele-
phone book and the identification data from the SIM card into the control unit.
Connecting the telephone with the hands-free system via the HPP profile
›
®
Activate Bluetooth and the visibility of your mobile phone on your telephone.
›
Switch on the ignition.
›
Select the menu Phone - New user in the information display and wait until the
control unit has completed the search.
›
Select your mobile phone from the menu of the units found.
›
Within 30 seconds enter the 16-digit code that is shown on the information dis-
play and confirm it according to the instructions on the display of your mobile
phone.
›
Follow the instructions on the information display and the mobile phone, to
store a new user or to download the telephone book and identification data

from the SIM card into the control unit.
The telephone primarily connects via the rSAP profile.
If the PIN code was stored, the telephone is automatically detected and connec-
ted with the hands-free system the next time the ignition is switched on. Check
your mobile phone to see whether this automatic connection has been establish-
ed.
Disconnecting the connection
›
By removing the key from the ignition lock (the connection is disconnected dur-
ing a telephone call).
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting the user in the information display in the menu Bluetooth -
User - Select user - Disconnect.
On vehicles which are fitted with a radio or navigation system at the factory, it is
possible to terminate the telephone call after removing the key from the ignition
lock by pressing the button on the touchscreen of the radio
tem; refer to the operating instructions for the radio or navigation system.
1) or navigation sys-
£
119
Communication