Table of Contents
Advertisement
To install the wood facing:
1.
Secure the wooden fence pieces (as shown
in Figure 16) with the
head screws, washers, and hex nuts provid-
ed.
2.
If using your own wood faces, make sure the
countersunk holes in your fence material are
deep enough to keep the entire screw head
below the fence surface.
Figure 16. Attach wooden fence assembly.
G8621 Heavy-Duty Sliding Table Shaper
5
⁄
''- 18 x 1'' Phillips
®
16
Guard Cover
To mount the guard cover:
1.
Place the guard cover over the threaded
holes on top of the guard body as shown in
Figure 17.
2.
Thread the knobs into the guard body and
secure the cover.
Figure 17. Guard cover.
-15-
Advertisement
Table of Contents
