Sound Settings - XTZ Divine 100.33 User Manual

Sound settings

Room Tuning -
Mechanical
adjustment of the
boundary frequency
This schematic picture (which does not shown actual measured curves) elucidates the different sonic characteristics of the bass frequencies.
By using the supplied bass plugs in the bass reflex
gates, you can alter the lower boundary frequency
of XTZ Divine 100.33.
The bass level can be adjusted in 3 different
settings in the bass range.
The figure below illustrates three basic settings.
Deep bass
With two bass plugs in the two gates you will reach
the deepest possible bass, which may be suitable for
smaller rooms.
"Quick" bass
Using one or none of the bass reflex plugs in the
gates, you have a "quick" bass which is especially
suitable for large rooms where the lower
frequencies often are amplified by the room.
Closed box
With two plugs in the two gates you have the most
flat and neutral frequency response.
10 (13)
This setting also depends on the size and
shape of the room, and also on your own
taste, so please has patience when trying
out your preferred setting.