Sound Adjustment; Sound Settings - XTZ Divine 100.49 User Manual

Sound settings

Room Tuning -
Mechanical
adjustment of the
boundary frequency
This schematic picture (which does not shown actual measured curves) elucidates the different sonic characteristics of the bass frequencies.
By using the supplied bass plugs in the bass reflex
gates, you can alter the lower boundary frequency
of XTZ Divine 100.49.
The bass level can be adjusted in 3 different
settings in the bass range.
The figure below illustrates three basic settings.
Deep bass
With one bass plugs in one of the two gates you
have the deepest possible bass, which may be
suitable for smaller rooms.
"Quick" bass
Without bass reflex plugs in the gates, you have a
"quick" bass which is especially suitable for large
rooms where the lower frequencies often are
amplified by the room.
Closed box
With two plugs in two gates you have the most flat
frequency response.
13 (16)
This setting also depends on the size and
shape of the room, and also on your own
taste, so please has patience when trying
out your preferred setting.