Technical Data; Installation - AEG FAVORIT 55210 User Manual

20

Technical data

The dishes are not clean
Limescales particles on the
dishes
The dishes are wet and dull
There are streaks, milky spots
or a bluish coating on
glasses and dishes
Dry water drop signs on
glasses and dishes
TECHNICAL DATA
Dimensions
Electrical connection - Voltage
- Overall power - Fuse
Water supply pressure
Capacity

INSTALLATION

WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
Fitting the appliance
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the water hoses are not kinked or
squashed.
Install the appliance on a kitchen sink, worktop or built-in..
The cleaning results are not satisfactory
• The selected washing programme is not applicable for the type of
load and soil.
• The basket is loaded incorrectly so that water cannot reach all
surfaces.
• Spray arm does not turn freely because of incorrect arrangement
of the load.
• The filters are dirty or not correctly installed.
• The quantity of detergent is too little or missing.
• The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
• No rinse aid has been used.
• The rinse aid dispenser is empty.
• Decrease the rinse aid dosage.
• Increase rinse aid dosage.
• The detergent can be the cause.
Width cm
Height cm
Depth cm
Information on the electrical connection is given on the rating
plate on the back of appliance.
Minimum
Maximum
Place settings
54,5
44,7
48,0
0,8 bar (0,08 MPa)
10 bar (1,0 MPa)
6