Water Connection - AEG FAVORIT 55210 User Manual

Positioning
Install the dishwasher into the furniture of the kitchen.
Make sure that the dimensions of the recess agree with the given dimensions.
Make sure that there are openings in the furniture for the inlet hose, the water drain hose
and the mains cable.
Adjusting the level of the appliance
Make sure that the appliance is level to close and seal the door correctly. If the level of the
appliance is correct, the door does not catch on the sides of the cabinet. If the door does
not close correctly, loosen or tighten the adjustable feet until the appliance is level.

WATER CONNECTION

Inlet hose
The appliance has safety features to prevent that the water in the appliance goes back into
the drinking water system.
Connect the appliance to a hot (max. 60°) or cold water supply.
If the hot water comes from alternative sources of energy that are more environmentally
friendly (e.g. solar or photovoltaic panels and aeolian), use a hot water supply to decrease
energy consumption.
It is important that a water tap or stopcock is near the dishwasher with easy access.
Water connection
21