Use Of Dishwasher Salt - AEG FAVORIT 55210 User Manual

°dH
< 4
1) No use of salt required.
Electronic adjustment
The water softener is set at the factory at level 3.
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function buttons B and C until the indicator lights of function buttons
A, B and C start to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B and C go off.
– The indicator light for function button A continues to flash.
– The digital display shows the current level.
Example: digital display shows
6. Press the function button A one time to increase the water softener level by one step.
7. Press the on/off button to save the operation.

USE OF DISHWASHER SALT

CAUTION!
Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause dam-
age to the water softener.
CAUTION!
Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the
appliance with salt before you start a washing programme to prevent corrosion.
Do these steps to fill the salt container:
1. Turn the cap anticlockwise to open the salt container.
2. Fill the salt container with 1 litre of water (only the first operation).
Water hardness
mmol/l °TH
< 0.7 < 7
Clarke
< 5
= level 3.
Use of dishwasher salt
Water hardness Digital display
setting
1)
1
9
level