Delay Start Button; Digital Display; Save Energy Button; Function Buttons - AEG FAVORIT 55210 User Manual

1)
1)
1) The indicator light is off when a washing programme operates.

Delay start button

Use the delay start button to delay the start of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.

Digital display

The display shows:
• Adjusted level of the water softener.
• Programme duration.
• Remaining time to the end of the programme.
• End of a washing programme.
• Number of hours in delay start.
• Fault codes.

Save energy button

This function decreases the temperature in the drying phase. Saved energy is between 10%
and 25%.
If dishes at the end of the programme are wet, keep the door ajar to let the dishes dry nat-
urally.
This function is available with all washing programmes. The related indicator light comes on
when you press the button.
The save energy function has no effect on some programmes. Refer to the chapter 'Wash-
ing programmes' for the list of programmes where save energy has or not an effect.

Function buttons

Use the function buttons for these operations:
• To set the water softener. Refer to the chapter 'Setting the water softener'.
• To cancel the washing programme in progress or a delay start in progress. Refer to the
chapter 'Setting and starting a washing programme'.
Indicator lights
The indicator light comes on when the drying
phase operates.
The indicator light comes on when the washing
programme is completed.
The indicator light comes on when it is necessa-
ry to fill the salt container. Refer to the chapter
'Use of dishwasher salt'.
The salt indicator light can stay on for some
hours, but it does not have an unwanted effect
on the operation of the appliance.
The indicator light comes on when it is necessa-
ry to fill the rinse aid. Refer to the chapter 'Use
of rinse aid'.
7
Control panel