Table of Contents
Advertisement
24
Technical data
TECHNICAL DATA
Dimensions
Electrical connection
Water supply pressure
Capacity
INSTALLATION
There should be a minimum
2mm gap between the top of
the dishwasher and
underside of bench top
CAUTION!
Instructions for the installation, the furniture door and the water connection are in the
separate template that is provided with this appliance. Follow carefully these instructions.
WARNING!
Make sure that the mains plug is disconnected from the mains socket during installation.
Width
Height
Depth
Voltage
Overall power
Fuse
Frequency
min.
max.
Place settings
The hose s hould not be
extended by more than
2 metres or water pump-
out problems ma y occu r
Secure dishwasher with
brackets and screws provided
Gap on both sides should be
equal, & no greater than
5 mm per side.
•
K ickplate fixing screws
If floor is not level, adjust
levellin g legs to suit
Remove entire plastic
membrane from sink trap
spigot & fit drain hose to spigot
with clamp
600 mm max.
300 mm min.
•
596 mm
818 - 898 mm
550 mm
220-240 V
2200 W
10 A
50 Hz
50 kPa (7 psi)
800 kPa (116 psi)
13
Advertisement
Table of Contents
