Beeper Mode Selection - Adesso NUSCAN 2100 Series User Manual

8. Beeper Mode Selection

Note: The Tone and Duration default setting of the barcode scanner is on
Medium. Do not program the barcode scanner unless necessary.
Start
Medium (Default)
Disable
Reset Mode
The reading of the "RESET" label turns all the
parameters back to default values.
All program setup must start with the "Start" label, and
reading the "End of Configuration" label to save any
changes.
Tone
High
Low
Medium(Default)
6
Duration
Long
Short
Very Short
Reset Mode
End of Configuration