CONTENT Dear user ,thank you for choosing our products ,we HousingdesignDescription will provide you the best user experience ,for your best TechnologyParameters using ,please read the manual before you use it Usingintroduction Bluetoothadapterinstallationguide Readerangle Packing list Resetfactorydefault Scannerbarcode LEDindicator&beeper USBchargingcable Scanningmodesettings adapter Sleeptimesettings...
Performance parameter Bluetooth adapter installation Guide (winxp) Transmission distance bluetooth:10m/2.4G:30m(open distance) 1.plug in the bluetooth adapter,bluetooth device icon will show on the system tray; 2.double click the bluetooth icon then the bluetooth device dialog box will show( user can also Transmission frequency 2.4GHZ click the bluetooth device from the control panel;...
Paired with Android /IOS Devices LED Indicator & Beeper 1.please comfirm the scanner is in paring mode ,otherwise ,the device can't Indicator Light Color Instruction search the scanner Green light and will Reading successfully and comes a short beep 2.Click the searched bluetooth device directly ,it can finish the pairing be off soon automatically...
Sleep Time Settings (for wireless & Bluetooth) Language selection Sleep Time America default Germany Setup Instruction: 1. Scan ‘Sleep Time’ bar code 2. Scan the time you want to set.(If set the sleep time 60 seconds, the scanner will be power off after 60seconds) France Italy 20 seconds (Default)
Code 39 Function settings Reading mode Code 39 on Code 39 off Code 39 ID as ‘m’ Default reading mode Continuous scan./ Auto-sensing enable Code 39 Full Code 39 Full ASCLL-on ASCLL-off Buzzer Code39 MOD43 Code39 MOD43 Verify Off Verify On Add barcode ID Code39 transmit Code39 transmit...
UPC-A EAN13 UPC-A off EAN13 on EAN13 off EAN13 ID as ‘d’ UPC-A on UPCA ID as ‘e’ Convert UPCA into Convert UPCA into Transmit EAN13 Transmit EAN13 EAN13 enable EAN13 disable check code-enable check code-disable Transmit UPCA Transmit UPCA check code check code disable Convert EAN13...
Code11 Code11/on Code11/off GS1 Omnidirectional/on GS1 Omnidirectional/off Code 11 ID as ‘u’ Code11 redundancy disable GS1 Omni ID as ‘j’ GS1 Limited/on Code11 Code11 auto CK verify redundancy enable GS1 Limited/off GS1 Limited ID as ‘k’ Code11 C verify Code11 CK verify FUNC Matrix 25 Cancel FUNC Mapping...
Page 11
Hide Characters Prefix & Suffix Setting Hide the behind Hide the last 5 All codes add suffix CR All codes add suffix CR+CR CHARS-disable characters-enable Hide the front Hide the front 5 LF all codes add suffix ETX All codes add prefix F2 CHARS-disable characters-enable Hide the middle...